Intake and Exhaust
Our precision and expertise assures our products are manufactured to the highest standards. Trick’s manufacturing process imparts superior material strength into each valve we make. You can be assured the highest quality, most pure materials go into a Trick titanium Valve. All materials are strengthened with a Trick proprietary heat treat and annealing process. this is what makes our valves so tough. Nobody knows titanium like we do.
New MICRO-PVD© Valve
Our MICRO-PVD Valve surfaces are super finished to remove stress risers and create a high gloss surface finish. All surfaces RA 4 max micro inches. These valves have a PVD coating that protects the surfaces from oxidation and alpha case forming at temperatures up to 1650° F.
MICRO-PVD is a registered trademark of Trick Engineering & Technologies (patent pending)
High Temperature Silicon Impregnated Aerospace Ti Alloy
High Temperature Alloy can withstand repeated thermal cycles over time and is specifically designed to handle punishing exhaust termeratures.
Trick’s titanium raw materials are tested and certified for chemical purity, uniform grain microstructure, and superior mechanical properties and sonically tested to be imperfection free.
Precision CNC Machined
Maximum run out tolerances of less than .0015″. True consistent head tolerances allow for easy seat grinding and installation. Precision Centerless ground stems. Maximum 12 Ra finish. Stem diameter held to +/- .0001″. Tolerances consistently held with every valve out of the box.
Trick-Kote 2 High Temperature Nickel Chrome Molybdenum Stem Coating
High integrity coating offering excellent valve guide lubricity and high temperature durability. Twice the bound strength as traditional valve stem coatings. Hardened steel tip inserts where required. Excellent valve tip wear properties. All valves are surface polished and Tech-Solv cleaned before packaging. Valve surfaces are polished free of machine lines and cleaned of contaminants.
MTI laboratory tested for structural integrity after hundreds of severe miles of testing at Pocono, Indy, and Michigan with flawless results. total confidence that Trick Titanium Valves can withstand the rigors of NASCAR, NHRA, IHRA, WORLD OF OUTLAWS and SPORTSMAN RACING.
Lash caps are required for non-steel tipped valves. Do not use lash caps on steel tipped valves. Recommended minimum valve to guide clearance for intake valves .0008″ to .001″ and for exhaust valves is .0012″ to .0015″. Normal valve to guide clearance for intakes .0013″ to .0015″ and for exhaust valves .0015″ to .0017″. Proper honing of valve guides to eliminate taper is most important for minimum valve to guide clearances. Bead lock dimensions vary between valve manufacturers. Trick stock valves come with bead grooves compatible with Manley locks, Del West and other bead lock designs are easily available on request.
Call for details. 517-694-7449